40oz 2nd Gen Sublimation Tumblers - 5 Colors Available with Handles

40oz handled tumbler for sublimation. Shiny white sublimation coating that produces vibrant colors. For use in a mug press or convection oven.

**HANDLES ARE NOT ATTACHED**

Available with options for handle colors. ALL TUMBLERS ARE WHITE for sublimation!! You are choosing the handle and lid color. Includes straw

Instructions for sublimating:

Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately

***Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.

 Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides.

*Tumbler Press* (Equipment settings and functions may vary.     

Press at 360°F for 120 seconds. DO NOT TURN. (brackets for handle do not allow tumbler to be turned in the press.) If the design is darker, an additional few seconds may be required. Remove transfer and let cool.

*Convection Oven* (Equipment settings will vary!)

Apply shrink wrap using a heat gun to shrink it tight to the tumbler.

Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!

Remove from oven and remove shrink wrap and transfer. TUMBLER WILL BE HOT!!

No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.